Quick Answer: Bissell drive belts (style 2031093, ~$16.99 at Bissell.com or ~$7-10 for a genuine-brand 2-pack on Amazon) fit most full-size Bissell uprights and are the single most common replacement part. Hoover PowerDash belts (440012733/440014074, ~$8-12) are genuinely OEM, but no confirmed genuine Hoover belt exists for the SmartWash line — Amazon listings there are compatible third-party parts, not factory originals. The tell that you need a belt, not a filter or hose: a burning-rubber smell paired with a brush roll that’s stopped spinning.
Most carpet cleaner parts fail quietly for months before anyone notices — a belt stretches a little more with every cleaning cycle, a filter gets a little more clogged, a hose barb cracks a little further — until the machine one day just stops picking anything up. Replacing the right $10-$30 part fixes most of these problems outright; the trick is knowing which part actually failed before you order one. This guide covers the parts that fail most often on Bissell and Hoover machines, with real part numbers and prices, plus the diagnostic signs that point to each one.
Carpet cleaner parts at a glance
| Part | Common failure sign | Fits | Genuine on Amazon? | Price |
|---|---|---|---|---|
| Bissell drive belt (2031093 / 32074, style 7/9/10/12/16) | Burning-rubber smell, brush not spinning | Most full-size Bissell uprights | Yes | ~$7-17 |
| Hoover PowerDash belt (440012733 / 440014074) | Brush not spinning, loose brush drive | PowerDash / PowerDash Pet (FH50700-series) | Yes | ~$8-12 |
| Hoover SmartWash belt (compatible/aftermarket) | Brush not spinning | SmartWash / SmartWash+ (FH52000/FH53000-series) | No — third-party only | ~$8-15 |
| Foam pre-motor filter | Weak suction despite clear hose | Most Bissell & Hoover uprights | Varies by model | ~$8-15 |
| Hoover SmartWash hose kit (440012815 upper) | Suction loss, visible crack at hose barb | SmartWash / SmartWash Pet | Mostly third-party | ~$25-37 |
| Bissell ProHeat 2X Revolution brush roll (1611133) | Brush spins but doesn't agitate carpet | ProHeat 2X Revolution Pet Pro | Yes | ~$20-30 |
| Bissell tank cap/valve assembly (e.g. 1618845) | Leaking or won't hold pressure | Little Green / ProHeat tanks | Yes | ~$10-20 |
1. Bissell Drive Belt (Style 7/9/10/12/16) — Most Common Failure Point
Bissell Replacement Belt, Style 7/9/10/12/16 (2031093 / 32074)
- Shared belt style across most Bissell full-size machines, including PowerForce, CleanView, and Pet Hair Eraser lines — check your model number against the listing to confirm the fit.
- Bissell.com sells the single-belt version (2031093) for $16.99; genuine Bissell-branded 2-packs run roughly $7-10 on Amazon.
- Bissell's own guidance is to replace this belt every 3-6 months, sooner if it already shows stretching or a glazed, shiny surface.
Get your replacement belt or filter in two days instead of waiting on it mid-project — try Amazon Prime free for 30 days.
A belt that’s stretched past its useful elongation — repair sources put the failure point around 30% beyond spec — slips against the brush pulley instead of driving it, which is exactly what produces that burning-rubber smell. If the brush spins freely by hand but the machine won’t turn it under power, this is almost always the part at fault, and it’s the cheapest fix on this whole list.
2. Hoover PowerDash Belt — Genuine OEM, Budget Machines
Hoover PowerDash Belt (440012733 / 440014074)
- Genuine Hoover part, sold Hoover-branded, for the compact PowerDash and PowerDash Pet Advanced (FH50700-series) machines covered in our best Hoover carpet cleaner guide.
- Same diagnostic logic as the Bissell belt above: brush not spinning under power despite spinning freely by hand.
- Confirm the exact FH-model number on your machine's label before ordering — Hoover's compact-line belts aren't interchangeable with the SmartWash line below.
This is the straightforward case: a genuine, brand-labeled part sold at a normal parts markup. The next belt on this list isn’t as clean-cut.
3. Hoover SmartWash Belt — Aftermarket Only, No Confirmed Genuine Part
Hoover SmartWash Compatible Replacement Belt
- Every SmartWash belt listing we could verify on Amazon is a third-party compatible part — CPAI, VACUSHOP, LANMU and similar brands — not a genuine Hoover-branded belt.
- Worth knowing before you buy: if you specifically want factory-original parts, Hoover's own support channel (not Amazon) is the more reliable route for a SmartWash belt, and a unit still under warranty may qualify for a repair instead.
- Compatible belts still do the job for most owners — just set expectations that "genuine OEM" isn't an option here the way it is for PowerDash or most Bissell machines.
This is the one case on this page where “genuine vs. aftermarket” isn’t really a choice — it’s worth flagging so you’re not searching for a factory part that, per available listings, doesn’t exist for this model line.
4. Foam Pre-Motor Filter — The Part Everyone Forgets
Carpet Cleaner Foam Pre-Motor Filter
- A clogged foam filter reduces suction without any other obvious symptom — no smell, no noise change, just weaker pickup that owners often blame on the machine itself.
- Bissell's general guidance mirrors the belt: replace roughly every 3-6 months, more often with heavy pet-hair use.
- Filters are model-specific — confirm the exact SKU against your machine's model number rather than ordering a generic "fits most" listing.
If suction feels weak but the brush roll spins fine and there’s no burning smell, check the filter before you assume the motor is failing. It’s the cheapest part on this list and the easiest one to overlook because nothing about a dirty filter looks obviously broken.
5. Hoover SmartWash Hose Kit — Cracked Barbs, Lost Suction
Hoover SmartWash Upper Hose Kit (440012815)
- Common failure mode is cracking at the hose barb fittings or the connection working loose at the wand, both of which bleed suction without any belt or filter involvement.
- A visible crack or a hose that disconnects under normal handling is the tell — check the full hose run before assuming the filter or belt is the problem.
- Most listings we found for this part are third-party compatible kits rather than Hoover-branded originals, the same caveat as the SmartWash belt above.
Hose problems are easy to misdiagnose as a weak motor because the symptom — lost suction — overlaps with a clogged filter. The difference is visual: a hose failure usually shows a crack, kink, or loose fitting you can find by running your hand along the full length while the machine is off.
6. Bissell ProHeat 2X Revolution Brush Roll — Spins But Doesn’t Agitate
Bissell ProHeat 2X Revolution Pet Pro Brush Roll (1611133)
- A different failure than the belt: the brush spins, but bristles worn flat or physically damaged stop agitating carpet fiber, so cleaning results drop even though the machine sounds and runs normally.
- Pairs with the machine reviewed in our Bissell ProHeat 2X Revolution review — replacing a worn brush roll is the fix when that machine stops performing like it did when new.
- Bissell also sells model-specific brush rolls for other lines (PowerForce Compact, ProHeat 2X Premier, ProHeat LiftOff) under different part numbers — match your exact model before ordering.
This is the part people replace latest, because a worn brush roll degrades cleaning performance gradually rather than causing an obvious malfunction. If a machine that used to leave carpet visibly cleaner now just leaves it wet, check the brush bristles for flattening or damage before assuming the formula or the heater is the problem.
Parts by the numbers
- 3-6 months — Bissell’s own replacement guidance for both drive belts and foam filters under normal use, per Bissell support documentation.
- ~30% — the approximate elongation past spec at which a stretched belt starts slipping against the brush pulley, the mechanical cause behind the classic burning-rubber smell.
- $7-37 — the price range across every part covered here, all well under the $123-$242 national average for a single professional carpet-cleaning visit per HomeGuide’s 2026 pricing data — the ceiling that makes a $10-30 part swap look cheap by comparison.
Before you order: diagnose first, then buy
- Match the symptom to the part. Burning smell + brush not spinning = belt. Weak suction + brush spins fine + no visible hose damage = filter. Weak suction + a crack or loose fitting somewhere on the hose = hose. Brush spins but carpet still looks dirty = brush roll bristles worn out.
- Confirm your exact model number first. Parts are model-specific, not brand-specific — check the label on the back or underside of the machine before ordering, not just the general product name.
- Check genuine vs. compatible before you buy. Most Bissell belts and the Hoover PowerDash belt are genuine, brand-labeled parts on Amazon. Hoover SmartWash belts and hose kits are currently aftermarket-only — still functional, just not a factory-original swap.
- Check the warranty window before ordering anything. If the machine is still covered, a call to Bissell or Hoover support may replace the part for free — see our Hoover troubleshooting guide for the correct US support number before you pay out of pocket.
The bottom line
Diagnose before you buy: a burning-rubber smell with a stalled brush points to the belt, weak suction with no other symptom points to the filter, and a visible crack anywhere on the hose points there instead. For most Bissell machines and the Hoover PowerDash, genuine brand-labeled parts are sold right on Amazon at a normal markup — order by your exact model number, not just the brand name. Hoover’s SmartWash line is the one exception worth knowing about upfront: no confirmed genuine belt or hose exists there, so a compatible aftermarket part (or a warranty-covered repair through Hoover directly) is the realistic option. Whichever part fails, a $7-37 fix is the far cheaper outcome next to the $123-242 a professional visit would cost for a problem your own machine can usually solve. If the machine itself is nearing the end of its useful life rather than one worn part, our best carpet cleaner guide is the place to start comparing replacements. For the tools that add capability rather than fix a failure, see our carpet cleaner attachments guide instead.